Re-cover, don’t re-roof. You’ll save money, time and aggravation and avoid time-consuming and costly tear-offs.

Whether your roof is large or small, flat or sloped, a Silicone Roof Coating Systems will provide a proven, guaranteed solution for renewing your weathered roof. They can be applied to virtually any existing roofing surface to create a seamless membrane that protects against permanent ponding water, ultraviolet light and severe weather.

The key advantages of using a silicone roofing system:

Silicone is permanent and will not degrade, chalk or crack under harsh UV rays.

Silicone forms a seamless membrane that withstands permanent ponding water without softening.

Silicone creates a smooth surface that offers excellent resistance to mold, mildew and staining.

Features & Benefits of Silicone Roofing Systems

AVOID TIME-CONSUMING AND COSTLY TEAR-OFFS.

By re-covering, you save on labor costs and avoid landfill expenses, plus your existing roof can be re-covered without any interruption to normal business operations.

EXTEND THE LIFE OF YOUR ROOF.

By renewing your roof, it’s possible that you may never need to replace the roof again.

REDUCE ENERGY COSTS.

The highly-reflective, glossy finish of Silicone Roof Coatings can help reduce energy costs.

IDEAL FOR USE ON FLAT AND LOW-SLOPED ROOFS.

Apply over pre-existing elastomeric roof coatings, metal roofs, built-up roofing, mineral cap sheet, and weathered single ply membranes (EPDM, Hypalon® and TPO/CPA). Re-coat existing sprayed-in-place polyurethane foam, concrete, wood, and many other coatings.

Call To Action

Free Estimate Call To Action goes here

HOW DOES A ROOF COATING RESTORATION ACTUALLY WORK?

We talk a lot about our roof coating restoration system, and how silicone can save building owners time, money and headaches, but people may still not understand exactly how the process works and the exact benefits of our system. We are going to tackle the basics of our system in this post: what it does, how it helps you, and how you can expect to benefit from it.

Silicone Roof Coating Installation

SURFACE PREPARATION

  • It is extremely important to get the roof clean and dry. First, we remove heavy deposits of dirt, leaves and other debris from the roof using a broom or air broomer, then we inspect the entire roof surface and flashings for any open seams, tears, cuts, etc. We repair these flaws so water is not blown in under membrane during the cleaning process. We pressure wash roof with water and allow to dry completely.
  • Biological Control: Areas of algae, mildew or fungus on the roof membrane or the existing coating are treated with a solution of bleach and water, followed by a power washer rinse using clear water.
  • Drying: After cleaning and rinsing the roof, we ensure no dirt or debris is present. We allow surfaces to thoroughly dry to prevent blistering.

PRIMING

  • Silicone Roof Systems will adhere to most surfaces without a primer; however, some substrates may require a primer for optimal adhesion. On all surfaces we test the surface and if the surface reflects poor adhesion, we prime all surfaces accordingly.

TAPING

  • We cover all joints, fasteners, flashings, seams and transition areas with special tape with special care for areas that require extra strength and flexibility.

APPLICATION

  • Typically we apply two coats of the silicone system we are applying making sure to following the appropriate specifications for thickness as well as ensuring uniform color and consistency.
  • We must allow the appropriate time for the first coat to properly set before applying the second coat when required.

CLEAN UP & MAINTENANCE

  • We do our best to leave your business in a better condition than when we arrived. Our team will clean up all of our materials and leave you with simply a clean new roof!

    Talk To a roofing expert





    Contact Info


    555 Main street, Ste 500 Anytown, ST 77777

    (555) 555-5550

    info@yourdomainname.com